Filter
Top Products
!
33
Picture of the System Setting Menu
See screen shot at right:
DATE and TIME are used to modify the current system date and time;
after the modification reserve the change by selecting SAVETIME; in
HDDFULL if selecting OVERWRITE system covers the previous
recording files; RECORDLEN can set the length of each recording
file(15 mins, 30 mins, 60 mins)Note: 15 minutes is suggested.
COMMCTRL can Activate the communication control protocols. The
existing comm control protocols are:
MODEM - Dial-up connection through modem.
AB- matrix control
DH Keyboard control
NONE upgrading system through serial port
Note: System time shall NOT be changed freely; otherwise it
would cause the malfunction of recording search.
Select the corresponding channel in CH. In WEEK the letter of each
day is chosen, when the letter displays are highlighted. SLOT1 and SLOT2
express the timed recording period of the current channel. SLOT2 should
be after the ending time of SLOT1. The setting range is 00:00-24:00
STATE ON means the time setting is on. OFF means the time setting is
OFF.
Note: 1: If you need to record all day long, set SLOT1 as 00:00-24:00
& state is on; set SLOT2 as off. 2: When setting time in WEEK,
several days can be set at the same time.
When Reviewing a certain channel’s timing, only the current day will
be highlighted.
Schedule
6.4
.3 Syste
m
S
etting
DATE 10-28-2003
FORMAT MM-DD-YYYY
TIME 12:22:01
FORMAT AM/PM SAVETIME
INTERVAL 005 SEC
HDDFULL OVERWRITE
RECORDLEN 15 MIN
REMOTEADDR 108
COMMCTRL NONE
SAVE CANCEL
General