Magnavox 26MV402X CRT Television User Manual


  Open as PDF
of 55
 
English
35
Upgradingthesoftware
USBupgrade
You can upgrade the software by using USB Memory Stick.
1 Connect your USB Memory Stick with the upgrade le to the USB
terminal on the side of your TV.
2 Use ▲▼
to select Softwareupdate, then press OK.
3 Use ▲▼
to select USB, then press OK.
4 Use ▲▼
to select the desired Update le.
5 Use ◄►
to select Yes, then press OK.
6 Read the on-screen instructions and conrm that you want to
continue with the installation.
Softwareupdateisinprogress.Pleasewait.
DonotremovetheUSBstoragedeviceorturntheTVoffwhile
upgradeisinprogress.
UpdateyourTVwithnewsoftware:
7 When the software upgrade is completed, press to set the unit
to go into Standby mode, then remove the USB Memory Stick.
8 Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
9 Press again to Turn the unit On.
• The TV starts up with the new software.
For further assistance, please contact Call Center.
Networkupdate
You can update the software by connecting the unit to the Internet.
1 Use ▲▼
to select Softwareupdate, then press OK.
2 Use ▲▼
to select Network, then press OK.
3 Use ◄► to select Yes, then press OK.
• This unit will then start checking for the latest rmware version.
4 Conrmation message will appear.
Use ◄► to select Yes, then press OK.
• The unit will start downloading the latest rmware version.
• The unit will start updating the rmware version.
• It may take a while to complete the updating.
5 When the software update is complete, press
.
to make sure the
unit goes to Standby mode.
6 Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
7 Press again to Turn the unit On.
• The TV starts up with the new software.
For further assistance, please contact Call Center.
Note
• In order to update software via the Internet, you must connect the unit to the Internet
and set up necessary settings. Networksettingsassistant
➠
p.31 Network
➠
p.31
• Please do not unplug the AC power cord or Ethernet cable while executing the
Networkupdate.
• All settings will remain the same even if you update the software version.
• The version of Net service will also be updated if newer version of Net service is
available when updating the rmware.
Automaticallycheckforlatestsoftware
This function lets you know if the latest software is available while the
unit is connected to the Internet.
1 Use ▲▼ to select Automaticallycheckforlatestsoftware, then
press OK.
2 Use ▲▼ to select the desired option, then press OK.
Off
Disable automatically check for latest software.
On
A message will appear if there is the latest software on the
network server.
Netixdeactivation
Displays the deactivation setting for Netix.
1 Use ▲▼ to select Netixdeactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
Yes
Deactivate the connection to Netix.
No
Activate the connection to Netix.
NetixESN
Displays the ESN information.
1 Use ▲▼ to select NetixESN, then press OK.
• Displays the ESN (Electronic Serial Number) to get any services
from Netix.
VUDUdeactivation
Displays the deactivation setting for VUDU.
1 Use ▲▼ to select VUDUdeactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
Yes
Deactivate the connection to VUDU.
No
Activate the connection to VUDU.
YouTubedeactivation
Displays the deactivation setting for YouTube.
1 Use ▲▼ to select YouTubedeactivation, then press OK.
2 Use ▲▼ to select the desired option, then press OK.
Yes
Deactivate the connection to YouTube.
No
Activate the connection to YouTube.
 previous next