English
4
ImportantSafetyInstructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
NotetotheCATVsysteminstaller:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, species that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
ExampleofAntennaGroundingasperNEC−National
ElectricCode
ANTENNADISCHARGE
UNIT(NECSECTION810-20)
GROUNDINGCONDUCTORS
(NECSECTION810-21)
POWERSERVICEGROUNDING
ELECTRODESYSTEM
(NECART250,PARTH)
ANTENNALEADINWIRE
GROUNDCLAMPS
ELECTRICSERVICE
EQUIPMENT
GROUNDCLAMP
WallMountBracketKit
Brand: SANUS
Model# Screwdimension
22MV402X SAN10b M4 x 0.472” (12mm)
For26inchTVs,screwsw/washersarerequired.(soldseparately)
26MV402X SAN213b
M4 x 0.472” (12mm)
+
Washer 0.039” (T1mm)
DoNOTusescrews
packedwithWallMountBracketKit
For32inchTVs,youneedtopurchasescrews
separatelywithdimensionsdescribedbelow.
32MV402X VM200s M4 x 0.472” (12mm)
• The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to
the Wall Mount Instruction Book.
• Funai is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV Wall Mount
Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.
Funaiisnotliableforthesetypesofaccidentsorinjurynoted
below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall Mount
Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specied length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws too
short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an electrical
shock injury.
Wheninstallingtheunitonthewall,allowthismuchspace.
Top: 11.8 inches (30cm)
Leftandrightside: 5.9 inches (15cm)
Bottom: 3.9 inches (10cm)