Filter
Top Products
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
POWER PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
Playing a Disc 13
• A stop hand with a cross-X
may appear on the screen when
you try to access a feature that is
not currently available. This is not
a problem with the TV/VCR/DVD.
• If a Disc is dirty or scratched, the
picture may be distorted or play-
back may stop. Remove the Disc
and try a different one.
• Press OPEN/CLOSE A or PLAY
(DVD) on the front of the
TV/VCR/DVD when the power is
off. This turns on the unit in DVD
mode (instead of the usual
TV/VCR mode).
Helpful Hints
Before you begin, turn on the power of other equipment con-
nected to the TV/VCR/DVD. Set a stereo (if applicable) to the
correct sound source or channel. Details are on page 10.
1
Press POWER to turn on the TV/VCR/DVD.
The unit will be in TV/VCR mode. The red VCR/TV
light will be on.
2
Press SELECT so the green DVD light appears
on the front of the TV/VCR/DVD. This puts the
TV/VCR/DVD in DVD mode.
3
Press OPEN/CLOSE A on the front of the
TV/VCR/DVD to open the Disc tray.
4
Place a Disc into the tray.
Some DVDs are recorded on both sides. Make sure the
label of the side you want to play is facing up. Or, if the
DVD is recorded on only one side, place the Disc in
the tray with the label facing up.
5
Press PLAY B. The tray will close automatically.
Playback will begin at the first Chapter or Track of the
Disc.
Or, press OPEN/CLOSE A or press the tray toward
the TV/VCR/DVD to close the tray. Playback will start
automatically.
If a DVD Disc menu appears instead, see page 48.
With some Audio CDs, playback will not begin unless
you press PLAY B.
6
Press STOP C to stop playback. If Disc playback
remains stopped for five minutes, a screen saver will
appear on the screen.
Insert a Disc.
4
Remember, only certain Discs will play.
See page 6 for details.
Press OPEN/CLOSE A
on front of the
TV/VCR/DVD.
3
1
2
6
5