Filter
Top Products
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURNTITLESETUP
A
-
B
REPEATSEARCH MODE
CLEAR
MODE
ANGLESUBTITLEAUDIO
DISPLAY
SPEED C.RESET
POWER PICTURE SELECTSLEEP
CH.
VOL.
MUTE
ZOOM
123
456
789
0 +10
+100
REPEAT
SLEEP Button
Press to set the Sleep Timer.
Details are on page 40.
SELECT Button
Press to choose TV/VCR or
DVD mode. The corresponding
light will appear on the front of
the TV/VCR/DVD to indicate
which mode is active. Details are
on page 16.
PLAY B Button
Press to start playing a Disc or
video cassette. Details are on
pages 12-13.
G / gButton
During Disc playback, press
briefly to skip to the next Track
or Chapter. Details are on pages
50 and 52.
Or, press and hold for two sec-
onds to search forward during
Disc playback. Details are on page
49.
During videotape playback, press
to search forward. Details are on
page 37. Or, press when play-
back is stopped to fast forward a
videotape.
STOP C Button
Press to stop Disc or videotape
playback.
Arrow Buttons
Use the Arrow buttons to select
or adjust menu items.
RETURN Button
Press to go to the previous
Setup menu in DVD mode. Press
to remove some menus or dis-
plays.
REPEAT Button
Press to play a Disc, Title,
Chapter, or Track repeatedly.
Details are on page 54.
ENTER Button
Press to accept or confirm a
menu setting.
14 Remote Control Buttons
PICTURE Button
Press to access the picture con-
trols. Details are on page 24.
POWER Button
Press to turn on or off the
TV/VCR/DVD.
Number Buttons
TV Mode: Press two digits to
access a specific channel. Press 0
before the number of a single
digit channel.
Details are on page 11.
+100/+10 button: To select
channels 100 or higher, press
+100/+10, then the Number but-
tons of the last two digits of the
channel number.
DVD Mode: Use the Number
buttons to enter a Track or
Chapter number.
+100/+10 button: Press before
entering double-digit numbers.
For example, to select Chapter
16, press +100/+10, then 1, 6.
k (pause) Button
Press to pause videotape record-
ing. Press again to resume
recording. Details are on page 25.
Press to pause videotape or
DVD playback. Press repeatedly
to advance the picture one frame
at a time. Details are on pages 37
and 53.
RECORD Button
Press once to start a recording.
Details are on page 25.
DISPLAY Button
TV/VCR Mode: Press to see
the tape counter, channel, or
time on the screen. Details are on
page 24.
DVD Mode: Press to see the
Disc status on the screen. Details
are on page 69.
TITLE Button
Press to access a DVD’s Title
menu if available. Details are on
page 48.