Filter
Top Products
24 EN
PLAYBACK
You can play back the disc/card in your desired order.
1 In stop mode, press [MODE].
2 Use [K / L] to select a track / file, then press
[OK].
• For JPEG files, use [K / L] to select a folder, then press
[OK] first, and then use [K / L] to select a file, then
press [OK].
•Press [CLEAR] to erase the last file of the program.
•Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files are displayed in the
right hand screen.
•Use [0 / 1] to go backward / forward between the
hierarchy of folders.
3 Press [B (play)] to start program playback.
• The program playback will start.
To exit from the program playback mode:
•Press [RETURN] in stop mode.
Program Playback
audio CD
JPEG
:
:
Track information
File information
audio CD
JPEG
:
:
“CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.
Track / File list : Track / File list in the original
order
Programmed list : Track / File list in the
programmed order
Cumulative playback time of all tracks / files in the
programmed list
Playback status
Current page / Total page number
Operation guide: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
0 : 26 : 24
CD_DA
0:36
1:14
0:45
0:50
0:53
0:20
0:54
8
9
10
11
12
13
14
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
- - / 16
1 62 3 4
7
5
8
Program Total
Page Prev Page NextPage DownPage Up
e.g.) audio CD
1
2
3
4
5
6
7
8
Note
• During program playback, press [C (stop)] once to
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the normal
program playback, press [RETURN] to exit from the
program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program, press
[REPEAT] repeatedly until “ Track” appears
during playback. To repeat the entire program, press
[REPEAT] repeatedly until “ All” appears during
playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press
[MODE]
to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
0 : 26 : 24
CD_DA
2 / 16 0 : 01 : 05
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
Program
Total
Page Down
E8M00UD_EN.book Page 24 Thursday, July 15, 2010 10:01 AM