Filter
Top Products
40 EN
VCP FUNCTIONS
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
1 Press [TAPE] first.
2 Press [SEARCH] repeatedly until “TIME
SEARCH” screen appears.
3 Use [K / L] to select the desired length of time
to fast forward or to rewind.
You can set the time up to 9:59.
4 Press [B] to fast forward.
Press [s] to rewind.
The playback will start automatically when it reaches
the selected point.
Press [TAPE] first.
To fast forward:
Press [D (forward)].
To fast rewind:
Press [E (reverse)].
To cue or review picture during playback
(picture search):
Press [E (reverse)] or [D (forward)] during playback.
Press it again and the unit will search in super high speed.
(in the SLP mode only)
To freeze the picture on the TV screen during playback
(still mode):
Press [F (pause)]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [TRACKING –/ +].
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
To reset the counter:
Press [CLEAR] to reset the counter to “0:00:00”.
To play back in slow motion:
Press [F (pause)] during playback, then press
[D (forward)].
Press [D (forward)] or [E (reverse)] repeatedly during
slow motion playback to select the desired speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to
its end, the cassette tape will rewind to the beginning,
stop and eject itself.
Auto repeat:
When auto repeat is on, the tape will rewind to its
beginning when it reaches its end and start over from the
beginning automatically.
To activate auto repeat:
Press [REPEAT] in stop mode.
“AUTO REPEAT B” appears, and auto repeat playback
will start automatically.
To cancel the auto repeat:
Press [REPEAT] again.
“PLAY B” appears.
• You can check the auto repeat status by pressing
[DISPLAY] during playback:
When auto repeat is off, “PLAY B” appears.
When auto repeat is on, “AUTO REPEAT B” appears.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO] repeatedly to select Hi-Fi or MONO for
playback sound mode.
• If you have connected a stereo TV to this unit, select
“HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Time Search
Note
•Press [C (stop)] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
Other Operations
TIME SEARCH
2:50
HIFI
MONO
L-channel R-channel
non Hi-Fi tapes --Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
LRL+R
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video heads.
• To return to playback from the picture search/still/
slow mode, press [B (play)].
Your Selection
Type of
recorded tape
E8M00UD_EN.book Page 40 Thursday, July 15, 2010 10:01 AM