Filter
Top Products
38 EN
FUNCTION SETUP
The indicators show the progress status...
Getting ready
Loading / Updating
Finish
(Success) (Error)
If the indicator shows Error...
1)
Unplug the AC power cord for about 10 seconds, re-plug AC
power cord and then turn the unit on.
2) Confirm the current software version.
3) If the software version is updated, the software update
has succeeded. If not, please try again.
Initialize the setting or SD card.
1 In stop mode, press [SETUP].
2 Use [K / L] to select , then press [OK].
3 Use [K / L] to select a desired option, then
press
[OK].
• Confirmation message will appear.
“Setup”:
Resets the setup menu to the default.
The setting for “Parental” and “Media Select” will not
be reset.
“Format SD Card”
(Available only when an SD card is inserted.):
Initializes the SD card.
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, from this player.
“Erase Saved BD-ROM Data (SD Card)”
(Available only when an SD card is inserted.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD card.
4 Select “Yes”, then press [OK].
•Press [OK] again to complete the settings.
5 Press [SETUP] to exit.
flash alternately
Initialize
Caution
• Do not remove the SD card while executing “Format
SD Card” or “Erase Saved BD-ROM Data (SD Card)”. It
damages the card.
• “Format SD Card” and “Erase Saved BD-ROM Data (SD
Card)” are not available when a Blu-ray Disc is in the
unit.
E8M00UD_EN.book Page 38 Thursday, July 15, 2010 10:01 AM