Filter
Top Products
EN-18
7. BEFORE YOU START
7.1 Finding the Viewing Video Source Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1. Press [STANDBY/ON .] to turn on the unit.
2. Turn on your TV.
3. Please locate the input/video button on TV’s remote control. The button may vary on the brand and model of
the TV. Once you have located the button, press until you see “Please wait...” or the Initial Setup menu on the
screen.
Please Wait...
This is the correct viewing of the video source input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
• If a certain amount of time has passed since you turned on the unit, welcome screen only appears the first
time you turn on the unit.
7.2 Initial Setup
Please follow the instructions below to complete the initial setup.
1. While welcome screen is displayed, use [Î / ï] to select “Next”, then press [OK].
2. Language setup screen will appear. Use [Î / ï] to select your language, then press [OK].
Language
Please select your language for on-screen
display.
English
Español
Français
Back
3. “Quick Start Mode” screen will appear. Use [Î / ï] to select the desired mode, then press [OK].
4. “Automatically check for latest software” screen will appear. Use [Î / ï] to select the desired mode, then press
[OK].
5. Network setup screen will appear. Use [Î / ï] to select the desired mode, then press [OK].
• If you select “Wired”, refer to “Wired” on page 41 for further information.
• If you select “Wireless”, refer to “Wireless” on page 44 for further information.