Filter
Top Products
EN
EN-51
■ Network Update
You can update the software by connecting the unit to the Internet.
1. Follow steps 1 to 3 in “Disc / SD Memory Card Update” on page 50.
2. Use [Î / ï] to select “Network”, then press [OK].
3. Use [Í / Æ] to select “Yes”, then press [OK].
• This unit will then start checking for the latest software version.
4. Confirmation message will appear. Select “Yes”, then press [OK].
5. The unit will restart automatically, then software update will start.
• The unit will start downloading the latest software version.
6. When the download completes, confirmation message will appear. Press [OK].
• The unit will start updating the software version.
• It may take a while to complete the updating.
7. After updating finishes, this unit will restart automatically.
C Caution
• Please do not unplug the AC power cord, LAN cable, wireless modem / router or press [STANDBY/ON .] to
turn the unit to standby mode while using the “Network Update”.
D Note
• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary
settings.
• For the network connection, refer to “Connection to the Network” on page 16.
• For the network setup, refer to “Network Connection” on page 41.
• All settings will remain the same even if you update the software version.
• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.