Filter
Top Products
25
English
System Menu Options
Audio, Subtitle, Disc Menu
This setting allows you to hear or read the
subtitles of a DVD in your choice of English,
Spanish or French etc. if the disc contains
multiple languages.
Parental
The rating of DVD discs equipped with the child
lock function is content-based and varies with
different discs. Depending on the particular disc,
you can lock out selected scenes or playback of
the entire disc.
1 Press 3 / 4 on the remote control to enter
parental control.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 3 / 4 to highlight
the selected item.
4 Press OK to confirm.
Password
Parental control features are password-
protected. The original setting is unlocked. This
setting allows you to input any password with
the Numeric Keypad (0-9).
Note:
– The Default Password is 1369, which is
always effective even after you have selected your
own password and changed it. To avoid the
possibility of others using the default password to
set the parental level and change the password,
you can record this default password in another
place and delete it from this manual. Some discs
can be limited depending on the age of users while
some discs cannot.
Default
You can use this function to reset all settings.
For preference setting, the set must be
in the STOP mode.
TIMER SET
This function enables you to set the start and
end time for playback in 1 of 4 signal sources.
The timer will then automatically switch the
system on and off after your defined period.
Setting the Timer
1 Press SET on the remote control to enter the
TIMER SET menu as illustrated.
2 Highlight TIME and press 1 / 2 to select ON.
3 Highlight Power on / Power off and use the
Numeric Keypad (0-9) to input the desired
start /end time hour and minute.
4 Press 1 / 2 to switch between am and pm.
5 Make sure that the end time is later than the
start time.
6 To select your signal source, highlight SIGNAL
and press 1 / 2 to select CATV, AIR, FM or
AM.
7 To select your channel, highlight CHANNEL
and use the Numeric Keypad (0-9) to input
your desired TV channel.
➜ In the CATV signal input mode, there are 124
channels to choose from (2-125).
➜ In the AIR signal input mode, there are 68
channels to choose from (2-69).
8 Press SET to exit the TIMER SETUP menu.
➜ When playback of the signal source is over,
the player enters the STANDBY mode.
To cancel Timer
In the TIMER SETUP menu, highlight TIME
and press 1 / 2 to select OFF.