Magnavox MDV540VR/17 DVD VCR Combo User Manual


 
Hookups (cont’d)
11
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
L
R
L
R
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
AUDIO OUT
DVD/VCR
VCR
ANT
-
IN
ANT-OUT
VIDEO OUT
AUDIO IN
VIDEO IN
C
R
/
P
R
Antenna or Cable TV
Signal to ANT-IN Jack
Audio Cable
Video Cable
Audio and
Video IN Jacks
on TV
1
3
2
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. Match the
cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to con-
nect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s AUDIO IN jack.You will not
use the red cable. Or, purchase a “splitter” audio cable to go from the left/right AUDIO OUT jacks of
the DVD/VCR to the TV’s single AUDIO IN jack.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the
DVD/VCR and to the VIDEO IN jack on the TV.
The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite, or Baseband
video.
4
Connect the power cords of the TV and the DVD/VCR to a power outlet.Turn on the TV
and set it to the correct Audio/Video In channel. Go to your lowest TV channel (01 or 02),
then change channels downward until you see VCR or DVD playback on the TV screen.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen
when you get the TV on the correct Audio/Video In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR’s display panel. Disable
Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the
front of the DVD/VCR for more than five seconds. Details are on pages seven and 64-65.
5
You are ready to turn on the DVD/VCR. Go to page 17 to complete the first-time setup.
DVD/VCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
This connection will let you use the features of both the VCR and the DVD Player.
H9660UD_1.qx4 04.4.14 4:47 PM Page 11