Filter
Top Products
14
Hookups (cont’d)
DVD/VCR to a TV and a Stereo
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
L
R
L
R
L
R
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
/
P
B
AUDIO OUT
DVD/VCR
VCR
ANT
-
IN
ANT-OUT
VIDEO OUT
AUDIO IN
VIDEO IN
C
R
/
P
R
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your
DVD/VCR.
2
Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO
OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo.
Match the cable colors to the jack colors.
3
Connect the supplied yellow video cable to the DVD/VCR VIDEO OUT jack on the
DVD/VCR and to the VIDEO IN jack on the TV.
To use Component Video cable or S-Video cable instead for the DVD Player, see pages 12-13.You will
still need the yellow video cable or RF coaxial cable for VCR features.
4
Connect the power cords of the DVD/VCR,TV, and Stereo to a power outlet.Turn on
the TV and set it to the Video In channel. Or, simply go to your TV’s lowest channel (02 or 03)
and continue changing channels downward at the TV until you see VCR or DVD playback on the TV
screen.
To help you find the right Video In channel at the TV, turn on the DVD/VCR. Press DVD to put the
DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen
when you get the TV on the correct Video In channel.
Turn on the Stereo and set it to the correct Auxiliary or Source mode. Check your Stereo
manual for details.
5
You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.
3
2
Antenna/Cable
TV Signal
1
H9660UD_1.qx4 04.4.14 4:47 PM Page 14