Filter
Top Products
10
Setting the Clock
Follow the steps below to set your
VCR's clock. Make sure:
oThe VCR is on and in VCR posi-
tion (see page 13).
oYou make each entry within 60
seconds of the previous entry (oth-
erwise, the VCR will exit Clock
Set mode and you will have to
start over).
1
Press the MENU button to bring up
the main menu display.
/_ Sa.ECTPUSHNO.SHOWN_"_
1 1 PROGRAM /
I 2 VCRSETUP |
I 3 TUNER SET UP |
I 4CLOCKSET /
I 5DAYUGHTSAV.TIME I
eCABLEBOXCO.TRO"_R)
_ END PUSHMENU j
2
Press the Number 4 button to select
CLOCK SET.
TI_ -:#
DATE -"3/_- I--
TO ENDPUSHMENU
3
Press two Nud_ber buttons for the
hour(s) and two Number buttons for
the minute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15
PM, press 02, 15, 2.
• Enter a 0 before single digit num-
bers.
• Entries that do not match the
clock's internal calendar will cause
a questions mark (?) to appear on-
screen.
• To make corrections, press the
CLEAR button until the number
you want to correct is flashing.
Then enter the correct number.
ITT_ TIME ng.15PM "_
I
4
Press two Number buttons for the
month, two Number buttons for the
day, and two Number buttons for the
year. For example, for July 1, 1995,
press 07, 01, 95. The day of the
week will appear automatically.
I TIME 2:15 PM "_
DATE 07/01/95 l
SAT. I
TOCORRECTPUSHCLEAR l
TOENDPUSHMENU J
5
Press the MENU button to start the
clock. The screen will return to the
program you were watching.
Remote Control
MENU Button-
Number Buttons-
STATUS Button
CLEAR Button
• •Qo ••• oooo ••11 ••co ••co •1•••1•••
• To reset the clock, follow the steps
above.
• To display the time, press the STATUS
button. A status display, which includes
the time, will appear on-screen. For
details, see "On-Screen Displays" on
page 11.
• Power failures for more thaff one
minute can cause you to lose your clock
setting as well as programmed chan-
nels. If this happens, follow the steps
on pages seven and ten.
• If the numbers entered do not match the
VCR's internal calendar, the entry will
be rejected and a question mark (?) wi,
appear on-screen.
• If you press the MENU button while
you are setting the clock, the on-screen
will return to the program you were
watching. If this happens, start over.