Filter
Top Products
9
Recording
1 TV and VCR
Turn the TV on and set
it to channel 3 or4______m____
Ilu
3
Make sure the
VCR light is on.
Use the CHANNEL
(Up/Down) buttons
or Number buttons to
select theq:hannel
you want to record.
Insert a tape.
o L_) @---
® []
erA_ cto_
O c:::9 O
8
To stop recording,
press the STOP
button.
7
Press the PAUSE/
STILL button to pause
recording. To start
recording again, press
the PAUSE/STILL
button again.
4
Press the (Tape)
SPEED button to
select tape speed.
Press the
REC(ord)/OTR button
once to start recording.
Remote Control
• If the REC(ord)/OTR button is pressed while a tape without a record tab is
in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear on-
screen, and the VCR will eject the tape.
• Recording options are on pages 17 - 27.
• You can change the tape speed while the VCR is recording, but some distor-
tion will appear on the tape•
" Read and follow the steps below to record
i a telivision program.
Turn the TV on and set it to channel 3 or
4, whichever the CH3/CH4 switch on the
back of the TV is set to.
2
: Insert a tape with its record tab intact
: (see page five) in the VCR. The power
: will come on, and the Cassette-Inside
: light will appear.
i If the VCR light on the display panel of
the VCR appears, go to step 4. If the
i VCR light does not appear, press the
! VCR/TV button once.
! Press the (Tape) SPEED button on the
." remote control until the desired tape speed
• (see page five) appears on-screen.
i5
i Use the CHANNEL (Up/Down) buttons
" or Number buttons to select the channel
• to be recorded•
.
!6
: Press the REC(ord)/OTR button once to
: start recording.
i7
: To pause the recording (for example, dur-
ing commercials), press the PAUSE/
: STILL button. To start recording again,
: press the REC(ord)/OTR button or the
: PAUSE/STILL button again.
To stop recording, press the STOP button.