Filter
Top Products
4
Getting Started
15
Before You StartConnecting UpControl & DisplaysGetting StartedPlaying DiscsDVD Setup Menu
Additional
Information
ENGLISH
•
Playing discs
The basic playback controls for playing
discs are cov ered here. Further func tions
are detailed in the next chapter.
Note
•
Throughout this manual, the term “DVD” means
DVD-Video, and DVD
±
R/RW. If a function is specifi c
to a par tic u lar kind of DVD disc, it is specifi ed.
1 Press the POWER ON/STANDBY button
on the front panel or POWER button on
the remote control.
If you are playing a DVD or Video CD, also turn on
your TV and make sure that it is set to the correct
video input.
2 Press
§
(STOP/OPEN/CLOSE) on the
front panel or
0
(OPEN/CLOSE) on the
remote control to open the disc tray.
3 Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc (if you’re loading
a double-sided DVD disc, load it with the side you
want to play face down).
4 Press
6
(PLAY/PAUSE) on the front
panel or
3
(PLAY) on the remote control
to start playback.
If you are playing a DVD or Video CD, a menu may
appear (see page 17).
Note
•
For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point
where the layers change. This is not a malfunction.
•
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
STOP
OPEN/CLOSE
PLAY/PAUSE
AUDIO EX
USB
//