Marantz DV4610 DVD Player User Manual


 
13
EN
English
Connection to an Audio System
Stereo system
NOTES (for method 2 only):
When using an AV amplifier with a built-in decoder (Dolby Digital, DTS, or MPEG decoder) as shown in the Method 2, set
DOLBY DIGITAL, DTSor MPEGto BITSTREAMaccordingly for audio output in the setup menu (refer to page 25). Set
it to PCMor OFFfor the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise
distortion, and may also damage the speakers.
The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
Set DOLBY DIGITALand MPEGto PCM, and DTSto OFFfor audio output in the setup menu for connecting to an MD
deck or DAT deck (refer to page 25).
Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
AUDIO
DVD
Audio Input
Jacks
Digital Audio
Input Jacks
AUDIO OUT
(Analog)
DIGITAL OUT
Method 1 DVD Player + Stereo system
Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder
Dolby Digital decoder,
DTS decoder
or
MPEG decoder
Method 1 Method 2
CONNECTIONS
The following show examples of connections commonly used to connect the DVD player to the TV and other
components.
If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-
ence with powerful and high-quality surround sound of a professional standard, which can be heard in movie
theatres. Use an audio coaxial digital or optical cable (commercially available) for the audio connections.
NOTES:
Be sure to turn off the power of all components in the system before connecting another component.
Refer to the instruction manuals for your TV, Stereo system and any other components to be connected to the
DVD player.
Optical cable (not supplied)
Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
Use a cable which is 3m or shorter.
Insert cable plugs firmly into the connectors when making connections.
If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Audio Cable
(supplied)
Optical Cable
(commercially
available)
Audio Coaxial
Digital Cable
(commercially
available)
or
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 13