–
15
–
EN
English
Getting started
• Turn on the power of the TV, amplifier
and any other components which are
connected to the DVD player.
• Make sure the TV and audio receiver
(commercially available) are set to the
correct channel.
Press the POWER button.
•“P-ON” will appear briefly on the display panel.
Press the OPEN/CLOSE button to open disc load-
ing tray.
Place the disc in the tray, with the label facing up.
Press the PLAY button.
• The tray will close automatically, and playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the PLAY button.
• When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title
Menu”.
Press the STOP button to stop playback.
NOTES:
•
A “prohibited icon” may appear at the top-
right on the TV screen during operation,
warning that a prohibited operation has
been done to the DVD player or the disc.
• With DVDs that use some titles for play-
back programme signals, playback may start from the
second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the
playlist was made and edited (deleted titles, repeated
recording).
5
4
3
2
1
DivX
®
WMAJPEG
MP3CDVCDDVD-RWDVD-V
PLAYING A DISC
Press the MENU button.
• The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the Cursor buttons (L / K / B / s) to select an
item, and the ENTER button to confirm selection.
4
3
2
1
DVD-V
Basic Playback
Disc Menus
DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate
Numeric buttons or use the
Cursor buttons (L / K / B / s) to highlight your selection in the
DVD main menu and press the ENTER button to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
DVD-V
General Features
Press the TOP MENU button.
• The title menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
Press the Cursor buttons (L / K / B / s) to select
an item, and the ENTER button to confirm selec-
tion.
• Playback will begin at the selected title.
When playing a Video CD with PBC func-
tion, the title menu will appear automatically.
Press the Numeric buttons to select the desired
title.
• Playback will begin at the selected title.
Press the RETURN button to go back to the title
menu.
3
2
1
VCD
3
2
1
DVD-V
Title Menu
Insert a Video CD.
Press the STOP button.
Press the Numeric buttons to enter the desired
track number.
• The PBC function is now cancelled and the playback of
the Video CD will start.
To call back the PBC function, press the STOP but-
ton twice, and then press the PLAY button.
• Title menu will appear on the display.
4
3
2
1
VCD
CANCELLING AND CALLING BACK THE PBC FUNCTION
NOTES:
• In setup menu, the FL OFF mode is not available.
• The FL OFF mode will be released when you press the
buttons listed below.
OPEN/CLOSE button (on both the remote and the front
panel),
SETUP, POWER or DISPLAY button (on the
remote),
POWER ON/STANDBY or FL OFF button (on
the front panel)
Press the FL OFF button on the front panel to turn
off the panel display.
• The FL OFF indicator will light up.
1
FL OFF Mode
• Press the MENU button to call up the DVD main menu.
• Press the TOP MENU button to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
DVD-V
CALLING UP A MENU SCREEN DURING PLAYBACK
During playback, press the
PAUSE button.
• Playback will pause and sound
will be muted.
To continue playback, press the PLAY button.
NOTE:
• On DVDs, set “STILL MODE” to “FIELD” on the display
menu if pictures in the pause mode are blurred. (Refer to
pages 24-25.)
2
1
DivX
®
WMAJPEG
MP3CDVCDDVD-RWDVD-V
Still / Pause
F
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 15