Marantz DV4610 DVD Player User Manual


 
18
EN
In stop mode, press the MODE
button.
The PROGRAM screen will
appear.
Press the Cursor buttons (or
) to select a track, then press
the
ENTER button.
Press the CLEAR button to erase the most recently
entered track.
Press the PLAY button to start programmed play-
back.
3
2
1
CD
A-B REPEAT
Press the A-B REPEAT button
at your chosen starting point.
A- appears briefly on the TV
screen.
Press the A-B REPEAT button
again at your chosen end point.
A-B appears briefly on the
TV screen, and the repeat
sequence begins.
To exit the sequence, press the
A-B REPEAT button.
NOTES:
The A-B Repeat section can only
be set within the current title (for
DVD), or current track (for Video
CD, Audio CD and disc with DivX
®
files).
A-B Repeat is not available with
some scenes in DVD.
To cancel the A point which was
set, press the CLEAR button.
A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
For some DivX
®
files, A-B Repeat playback may not
function.
3
2
1
DivX
®
CDVCDDVD-RWDVD-V
Programme Playback
A -
A - B
OFF
PROGRAM
ENTER
PLAY
CLEAR
TOTAL 0:03:30
CD-DA
1/ 2
1/ 1
NOTES:
While the programme is being played back, the STOP
button works as follows.
Press the STOP button once and then the PLAY button
again. Playback will restart from the point where the
STOP button was pressed. (Programme continued.)
Press the STOP button twice and then the PLAY button
again. Playback will restart from the first track in the
usual way.Your programmes will be stored unless
either the disc tray is opened or power is turned off.
Up to 99 tracks can be entered.
To erase all tracks in the programme at once, select
ALL CLEAR at the bottom of the list at step .
If you wish to repeat the current track in the pro-
gramme, press the REPEAT button repeatedly until
TRACK appears during playback. If you wish to
repeat the entire programme, press the REPEAT button
repeatedly until ALL appears during playback.
Refer to page 22 for Programme Playback of MP3,
WMA, and JPEG.
If eight or more tracks have been set in a programme,
the user can switch the right part of the screen with the
SKIP
HH
or
GG
button
.
2
This function allows you to programme a playback order in a
desired sequence.
To activate the Repeat function, press the REPEAT button
during playback.
The Repeat mode changes as described below every time
you press the button.
CDVCD
REPEAT TRACK / GROUP / ALL
NOTES:
The Repeat Track setting will be cleared when moving
to other track.
Repeat playback does not function during A-B Repeat
playback.
Repeat playback is not available when playing the
Video CD with PBC function.
DivX
®
WMAJPEGMP3
TRACK ALLOFF
(current track repeat) (entire disc repeat)
(repeat off)
TRACK ALL
OFF
(current track
repeat)
(
entire disc
repeat)
(repeat off)
GROUP
(current folder
repeat)
NOTE:
The Repeat Track/Group setting will be cleared when
moving to other track or group.
To activate the Repeat function, press the
REPEAT button
during playback.
The Repeat mode changes as described below every time
you press the button.
DVD-V
NOTES:
The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
Repeat playback does not function during A-B Repeat
playback.
Repeat Title/Chapter is not available with some scenes.
•“ALLis not displayed when playing the DVD-RW discs
recorded in Video mode.
Repeat
REPEAT TITLE / CHAPTER
The REPEAT button is available only during playback.
CHAPTER TITLEOFF
(current chapter repeat) (current title repeat)
(repeat
off)
PLAYING A DISC
CHAPTER TITLE
OFF
(current chapter repeat) (current title repeat)
(repeat
off)
ALL
(entire disc repeat)
DVD-RW
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 18