Filter
Top Products
22
CURRENT PASSWORD : - - - - - -
NEW PASSWORD : - - - - - -
PASSWORD CONFIRM : - - - - - -
The Factory Default Password is 111111. To enter this number press the button labeled 1 on
the front panel of the DVR six times.
Once you input the your current password, set a new six digit password using the numbered buttons
, , ,
on the front panel of the DVR.
Then, confirm your new password by entering the number again.
When the new password is accepted, the following screen message will flash:
PASSWORD CHANGED
The message will blink 3 times. Then the SUB MENU will return. If the password is not accepted, you will
receive a message that informs you that it was not accepted and the SUB MENU returns. You may try
again by repeating the same steps.
(2)SUB MENU - TIME SET
To set the date and time, navigate to TIME SET in the SUB MENU and press the select button
The following screen will appear:
TIME
2004/02/17 19:44:32
^
PRESS (UP, DOWN) , THEN (SELECT)
PRESS (MENU) TO EXIT
2004/02/17 = year/month/day 19:44:32 = hour/minute/second
Use the up
and down buttons on the front panel to move the arrow ^below the
number you wish to change. Then press the select button
to change the numeric values.
(3)SUB MENU - AUDIO CONTROL
AUDIO RECORD & AUDIO MUTE options are available for models only.
To set recording with or without audio, or to set audio to mute, navigate to AUDIO
RECORD or AUDIO MUTE in the sub menu and press the select button
to turn these features on
or off.