Filter
Top Products
31
RECORD VIEW CONTROL
When you have finished entering all of the settings in the DVR menu and the record button is
pressed, the recording process starts immediately. In the example below, the recording channel
indicators n next to CH1 and CH2 indicate that those channels have been selected to record. CH3 and
CH4 are not recording.
RESET TO FACTORY DEFAULT SETTINGS
To reset the DVR settings back to the factory default, press the pause button 5 times.
After resetting, the password will return to the default value (111111) and all DVR settings on the menu
will return to default.
Reset to factory default will not erase any video data on the hard disk drive.