Filter
Top Products
12
CHAP. 3 Installation
6) VCR, VIDEO PRINTER
Connect VCR or VIDEO Printer to VCR out on the rear panel of DVR.
7) Other External Device
RS-232C : Control DVR through RS-232C port by using PC.
RS-485 : Control external device like PTZ Camera
RELAY Output : Relay Output
SENSOR Input : SENSOR Input (Alarm connection)
ETHERNET : Connection to LAN, WAN, Internet.
VGA : Connection to a VGA monitor(CRT,TFT LCD) if optional VGA board is fixed
on the main board as shown in the following figure.
Resolution set by manufacturer is 800x600 60 Hz, and user can set resolution
in MONITOR SETUP / VGA SETUP / VGA RESOLUTION.