Filter
Top Products
11
3) Camera
4) Monitor
Connect cameras to the camera input on rear panel of DVR marked CAMERA IN.
LOOP
CH3
CH2
CH1
CH4
VCR
MONITOR
CAMERA IN
Connect the video output marked MONITOR to Video-In of Main monitor.
5) Power
When using a drive or drives larger than 200GB, you
must use the Main and Sub power at the same time.
Drives larger than 200GB consume a greater amount of
power and required the additional Sub power supply.
FIRST, remove the jumper on the main board prior to
connecting both power supplies.
CHAP. 3 Installation
SUB
MAIN
DC12V
LOOP
CH3
CH2
CH1 CH4
VCR
MONITOR
CAMERA IN
1
Using drives at or under 200GB in conjunction with a
CD-RW drive requires the use of the Main power
supply only.
Do not connect
the Main power
and Sub power
at the same time
if this jumper
has not been
removed.