Filter
Top Products
29
ENGLISH
3
Timer recording
Press VCR MENU. Select the
“TIMER REC SET” option , then
press ENTER.
Press SET + or – to select the date,
then press ENTER.
1
2
Press SET + or – to select one of the
program line, then press ENTER.
4
Press VCR/DVD to select the VCR mode.
Load a cassette tape with the erase prevention tab intact.
Press the CALL button to verify that the time and date are
correct (see page 27).
Preparation:
•
•
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
Set the start time, end time, channel
and tape speed as in step 3.
Example: Program a timer recording for the 26th day, channel 125
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).
NOTES:
Press CANCEL to move cursor backward
for correction.
To record from external source set the
channel to “L”. “L” will appear next to CH
125 (or 69).
•
•
5
To enter other programs, repeat step
2 through 4.
• To return to the normal screen,
press VCR MENU twice.
6
Press TIMER REC. The clock symbol( ) will appear on the
display and the VCR stands by for recording. At the same
time, VCR mode will change to DVD mode automatically. You
can use DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 20 seconds before the time
you predetermined.
NOTES:
If the clock symbol(
) does not appear on the display in spite
of the pressing of TIMER REC, the cassette may not have been
loaded yet. (see page 22)
If the cassette is ejected in spite of the pressing of TIMER REC,
the erase prevention tab of the cassette may have been
removed. (see page 22)
•
•
NOTES:
If the clock symbol(
) blinks when the
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove
the cassette tape.
During timer recording standby mode,
the VCR mode cannot be selected. To
use the VCR, press TIMER REC at
first, then press VCR/DVD to change
to VCR mode. After you use the VCR,
press TIMER REC again to put the VCR
into timer recording standby mode.
If you press TIMER REC during timer
recording, the recording operation will
be interrupted. If you press TIMER
REC again within the programmed time,
the recording operation will start again.
After a power failure or disconnection
of the power plug, all programmed
recording settings and time display
will be lost upon resumption of power.
In this case, reset the clock (see page
19) and reprogram any timer
recordings.
•
•
•
•
CH
DVD MENU
RETURN
CLEAR/
CANCEL
ANGLE/
COUNTER RESET
CLOCK/
COUNTER
PLAY MODE/
SPEED
AUDIO/
AUDIO SELECT
TV/VCR
ZOOM
TRACKING/
SET
–
TRACKING/
SET
+
REPEAT A-B
TIMER REC
SUB TITLE/
ATR
MARKER
SELECT/
ENTER
JUMP /
ZERO RETURN
SETUP/
VCR MENU
TOP MENU
123
EJECT
OPEN/
CLOSE
VCR/DVD
DISPLAY/CALL
456
POWER
INPUT SELECT/
PROGRESSIVE
2C51001AE (26-31) 18/11/03, 2:38 PM29