Filter
Top Products
30
Timer recording
Timer recording special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the indicator at
DATE will change as follows, in this case the day is
Friday.
In case Timer programs-overlap
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
•
NOTES:
The daily/weekly recording can be made continu-
ously until the recording is canceled or the tape
reaches the end.
During timer recording the automatic rewinding
mechanism does not function.
•
•
Confirmation / Cancellation of the Timer
recording
1
If the Timer has been activated, press TIMER REC
to deactivate the Timer. The clock symbol(
) will
disappear. Then press VCR/DVD to change to
VCR mode.
2
At picture 1 on the
previous page select the
“TIMER REC SET” option
and press ENTER.
Then the timer program
list as right will appear on
the screen.
To cancel Timer program:
4
Press VCR MENU repeatedly until the TV-picture
appears.
3
The current day (Friday) SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-WE WKL-TH (Weekly Thursday)
(Weekly Wednesday)
One month later
minus one day
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
Press SET + or – to
select the unnecessary
program, then press
CANCEL to cancel the
program.
To confirm Timer program:
NOTES:
• If there are other timer record programs remaining,
TIMER REC must be pressed to reactivate the timer,
otherwise the remaining timer record programs will be
ignored.
• You cannot confirm the Timer program during timer
recording operation.
•
You can also correct the programmed setting in program
confirm mode.
At step 2 above, press ENTER to enter the program
input mode. Then press ENTER repeatedly until the
+/
–
/ENTER/CANCEL/MENU
DATE START END CH
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–––––– –:–– –:–– –––
–
–
–
–
–
–
–
26(SU)
11
:00
PM
11
:30
PM
125
SLP
item you wish to correct
blinks. Then correct the data
with SET + or –.
Then press VCR MENU re-
peatedly until the TV-picture
appears.
2C51001AE (26-31) 18/11/03, 2:38 PM30