Memorex MVBD2535GPH Blu-ray Player User Manual


  Open as PDF
of 194
 
39
SETUP MENU (CONTINUED)
Ifusingawiredinternetconnection,selectWIREDusingthe
Navigation(π,†)buttons,thenpresstheENTER button,
andtheunitwillautomaticallybeconfiguredtoaccessthe
internet. If successful, you will get the message, Wired
networkconnectionsuccessfullysetup.
Ifusingawirelessinternetconnection,seepages41-42.
CONNECTION
LinkStatus:If thenetworkconnection is active,“LinkUp”
appearsbelowLinkStatus.Ifthenetworkconnectionisnot
active,“LinkDown”displaysbelowLinkStatus.
MACAddress:ThiswillshowtheMACAddress.
IPMode:SelectOfftodisabletheinterface.SelectManual
tomanuallyconfigurenetworksettings,suchasIPaddress,
subnetmask,andgatewaysettings.SelectDynamictouse
theDHCPtoautomaticallyobtaintheIPAddress.
YoucanconfiguretheIPAddress,SubnetMask,Gateway,
PrimaryDNSandSecondaryDNS,butitisnotrecommended
unless informedto doso byyourISPprovider.Pressthe
ENTERbuttonwhenconfirmingtheseoptions.
MANUALNETWORKSETUP
NETWORKSETUPMENU:
ToentertheNetworkSetupmenu,whilenodiscisinsertedordiscisintheStopmode,ifnotalreadyattheSetupscreenpress
theHOME/SETUPbutton,selectSettingsusingtheNavigation(π,†)buttonsandthenpresstheNavigation(®) button.
SelectNetworkusingtheNavigation(π,†)buttonsandthenpresstheNavigation(®) button.
The unit will perform a network test. When the test is
complete, a confirmation window will appear. Press the
ENTERbuttontoselect“OK”.
Ifthetestfails,double-checkyourEthernetcableconnection,
wirelessrouter,IPsettings,orcontactyourISP.
NETWORKTEST
INFORMATIONSETUPMENU:
ToentertheNetworkSetupmenu,whilenodiscisinsertedordiscisintheStopmode,ifnotalreadyattheSetupscreenpress
theHOME/SETUPbutton,selectSettingsusingtheNavigation(π,†)buttonsandthenpresstheNavigation(®) button.
SelectInfousingtheNavigation(π,†)buttonsandthenpresstheNavigation(®)button.Theinformationontheunit,such
asSoftwareVersion,SoftwareDate,HardwareVersion,etc.willappear.Theseitemscannotbechanged.
QUICKSETUPMENU:
ToentertheQuickSetupmenu,whilenodiscisinsertedordiscisintheStopmode,ifnotalreadyattheSetupscreenpressthe
HOME/SETUPbutton,selectSettingsusingtheNavigation(π,†)buttonsandthenpresstheNavigation(®)button.SelectQuick
SetupusingtheNavigation(π,†)buttonsandthenpresstheNavigation(®)button.Ifyouselect“Yes,performQuickSetup”,you
canselectOSDlanguage,ResolutionandTVaspect,orselect“No,thanks.I’llgothroughthefullsetupmenulater”toreturntothe
previousmenu.
 previous next