Filter
Top Products
Configuring disc options
45
SCART switch
The SCART settings menu allows you to configure how the 598
controls the SCART switch output (pin 8), which usually
switches a television or monitor to display the SCART output:
When playing activates the output when the 598 plays a video
disc or is put into setup, and it remains active until the 598 is put
into standby.
By source activates the output for sources which have the
SCART setup menu set to On in the Source configuration
menu. This allows you to set up a separate CD source which
does not affect the television or monitor. For more information
see To set configuration options, page 63.
Fn-sel only
This option is only required for certain televisions that do not
correctly follow the SCART standard:
● Only select No if the television picture does not reappear
when the 598 is put into standby.