Filter
Top Products
Troubleshooting
66
General operating problems
No lights are displayed when
switching on
❍ Check that your AC power supply is connected correctly.
❍ Check that the ON/OFF switch on the back panel is in the ON
position.
A question-mark symbol is displayed
on the on-screen display
This indicates that the function you have selected is not
currently available on the disc you are playing.
The on-screen display shows WRONG
REGION CODE
This indicates that you are attempting to play a DVD-Video disc
encoded for a region that is not supported by your DVD player.
The 598 unexpectedly switches from
pause to stop, or fades the screen to
black
This is caused by the pause or stop timeouts.
The pause timeout automatically switches the 598 from pause
into stop mode if no key has been pressed for the specified
time.
The stop timeout automatically fades the screen to black if the
598 is left in stop mode and no key has been pressed for the
specified time.
The on-screen display shows PLEASE
CHECK DISC when attempting to play
a disc
❍ Check that the disc is positioned correctly in the drawer; see
To insert a disc, page 13.
❍ If it is a single-sided disc check that the label is uppermost.
❍ Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.