Mitsubishi Electronics 737 SERIES Projection Television User Manual


 
40 4. TV Menus
Inputs
Name
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete (deactivated HDMI only)
On/Off (ANT only)
Lets you assign or • change names of inputs appearing in
the Activity menu.
Press - to move between inputs.
Press - to select a name.
You cannot change the name of the current input; you -
must first switch to another input. If you have only one
input, such as a cable box, make sure the Ant input is
On and switch to Antenna in the Activity menu before
renaming the single input.
Lets you turn the • Ant input On/Off (to display/hide it in the Activ-
ity menu).
Lets you delete unused HDMI inputs from the • Activity menu.
A CEC-enabled tuner can be named either •
Cable Box
or
Satellite
.
A CEC-enabled DVD player can be named •
DVD
,
DVD2
, or
Blu-ray.
General Notes
When you change an input name in the Name menu and then exit the Name menu:
The name is changed•
The icon in the • Activity menu is changed
Audio and video settings are changed to the defaults for the new device type.•
837 Series:• All previous NetCommand IR “learning” for the input is erased.
Notes for HDMI devices
Disconnecting an HDMI device:• When you disconnect an HDMI device, the icon remains in the Activity menu until
you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.
If the • New Device Found screen does not display as expected when you connect an HDMI device, see “Reac-
tivating Auto Input Sensing for an HDMI Input,” page 11.
HDMI Control and CEC-Enabled Devices:• See Appendix C, “HDMI Control of CEC Devices,” page 67.
If case of CEC conflicts:• Turn off CEC signals in one of these ways:
Turn off the TV’s HDMI Control signals to the device. -
Turn off each device’s internal CEC capability. -
See Appendix C for the TV’s HDMI Control or, to turn on/off a specific device’s response to CEC signals, see
the device owner’s manual.
Learn
837
Series
Sets up or changes NetCommand IR control of the current viewing device.
See “About NetCommand IR Control,” page 45.
AVR
837
Series
Sets up or changes NetCommand IR control of an A/V receiver.
See “NetCommand IR Control of an A/V Receiver” on page 51.
HDMI Control
On, Off Select On or Off to enable or disable the TV’s control of a CEC-enabled device.
See Appendix C for use of this feature.
Activity
Lets you • customize the Activity menu choices for the current input.
Highlight the activity name and press •
ENTER
to make changes.
See • “How is the Activity Menu Generated?” on the opposite page.