Filter
Top Products
24
Mitsubishi offers 2 ways to set your VCR to record upcoming
broadcasts. Choose from:
Conventional VCR timer recording
Quick Program (easy) -- VCR does not need to be ON to
begin programming
You can schedule up to 8 recording events within a one month
period.
Clock must be set before any timer recordings can be performed.
Conventional VCR Timer Recording
1 Load a tape with its erasure prevention tab intact into the
VCR.
2 Press MENU. VCR Main Menu appears on your screen.
Use the ADJUST buttons to select Program to record.
Press ENTER.
If there is at least one programmed recording already
entered, you will see the Recap screen. Wait 4 seconds,
and the Program to record menu will appear.
IMPORTANT
If you have already programmed 8 recording events,
Program memory is full will appear on your screen for 3
seconds, and then the Recap screen will appear. Use
CANCEL to erase an entry before you can add another
one.
3 Program to record menu appears. Press the ADJUST
buttons to choose the channel you would like to record; for
example, channel 2. Press ENTER.
• If you are using a cable box, enter the channel number
on which the cable box sends a signal to your VCR
(usually channel 3 or 4).
• To record from an external source, press INPUT or press
the ADJUST buttons to:
Select External L1 for a source connected to the rear
panel.
Select External L2 for a source connected to the front
panel.
4 Day will flash. Press the ADJUST buttons to choose the day
on which you want to record; for example, Monday the 10th.
Your choices are:
• a single day up to one month away
• every day from Monday through Friday; for example, to
tape a soap opera. To program, press the ADJUST
buttons until Monday-Friday appears.
• the same day every week; for example, to tape your
favorite weekly sitcom. To program, press the ADJUST
buttons until Every and the desired day of the week
appears.
Press ENTER once you have made your choice.
ªVCR Main Menu
Your choices are:
¬Program to record
√Customize choices
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
CH DAY ON OFF
§ 10 TH13 9:00pm 10:30pm SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
Recap screen
Timer Recording
¬Program to record
ƒChannel 2
ƒDay --
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
¬Program to record
ƒChannel 2
ƒDay Monday 10
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select