Filter
Top Products
43
operating your TV with the HS-U449 remote control
1 Set the VCR/TV slide switch to TV position on the HS-U449
remote control to tell the remote that you want to operate the TV.
2 Point the remote control towards the TV and press the desired
buttons. To once again control the VCR, set the VCR/TV slide
switch to VCR position.
To program the HS-U449 to respond to VCR-B signals
The HS-U449 has two remote control operational settings, VCR-A
and VCR-B. Both signals are available so that you may separately
control two Mitsubishi VCRs that are placed closely together.
However, the remote control for the HS-U449 will only send VCR-A
signals. By setting the HS-U449 to respond to VCR-B signals, you
will NOT be able to operate the HS-U449 using the remote control
that came with this VCR. Other selected Mitsubishi VCR remotes
and TV remotes are capable of sending both VCR-A and VCR-B
signals.
to program the HS-U449 to respond to VCR-B signals
1 Make sure the HS-U449 is plugged in but turned off. On the
VCR front panel, press REC SPEED and REW at the same
time. To confirm that the VCR responds to VCR-B signals, b
appears on the front panel display.
to reprogram the HS-U449 to respond to VCR-A signals again
1 Make sure the HS-U449 is plugged in but turned off. On the
VCR front panel, press REC SPEED and FF at the same time.
To confirm that the VCR responds to VCR-A signals, A appears
on the front panel display.
Child Lock
The child lock feature prevents others from using your VCR. To
lock the VCR:
1 Press and hold down DISPLAY on the remote control for about
8 seconds. “LOC” will appear on the front panel display for 4
seconds.
When the child lock feature is in use, LOC display will reappear
when you press any of the buttons.
2 To cancel the child lock, press and hold down DISPLAY for
about 8 seconds.
The LOC display will reappear when DISPLAY is pressed, and
when you hold down this button, it will go out to show the child
lock is cancelled.
IMPORTANT
You can lock the VCR with the power off, even if the VCR
is standing by for a programmed recording. If you lock the
VCR with no cassette in it, the VCR will not accept a
cassette.
REW FF
REC SPEED
SP/EP
Advanced Features
213
546
879
0
VCR
TV