![](http://pdfasset.owneriq.net/a/a4/aa4912e0-d4c2-49ed-ae97-eb88e8081460/aa4912e0-d4c2-49ed-ae97-eb88e8081460-bgc.png)
10 1. Basic Setup and Operation
In Canada call 1(800) 450-6487 for assistance.
Key
Off
Steady On
Slow Blinking
Fast Blinking
POWER Indicator
LED Color TV Condition Additional Information
None
TV is powered off. Normal operation.
Green
TV is powered on. Normal operation.
Green
TV powered off, auto-on TV Timer is set. Normal operation. TV can be turned on at any time.
Green
TV power just turned on. Normal operation. A picture will appear shortly.
TV just plugged into AC outlet.•
AC just restored after power failure.•
TV is rebooting after power fluctua-•
tion or receiving abnormal digital
signals from a digital channel or
digital device.
You have begun the procedure to •
update software from an authorized
flash memory device.
Wait approximately two minutes for blinking to stop before
turning on. Normal operation.
Yellow
TV is too hot.
The TV will display a warning message and shut off if it over-
heats.
• Ambientroomtemperaturemaybetoohigh.Turnoff
the TV and let the room temperature drop.
• Clearblockedairvents.Ensureatleastafour-inch
clearance on all sides of the TV.
Red
TV may require service.
Turn off the TV and unplug the set from the AC power
source. Wait one minute and then plug the set back in. See
Appendix E.
If the LED is still on, contact Mitsubishi to receive Authorized
Service Center information:
U.S.A. Go to www.mitsubishi-tv.com or call 1-877-675-2224.
Canada. Go to www.MitsubishiElectric.ca or call
1-800-450-6487.
POWER
POWER
TV Controls and Indicators, continued