Mitsubishi Electronics LT-46148 Flat Panel Television User Manual


 
6. NetCommand IR Control 59
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Guide Displaying the Disc Menu (DVD or high-defini-
tion disc format)
“Learn” the
DISC MENU
,
TOP MENU,
or other key as
named on the original remote in the Guide learn-
ing position.
While watching the device, press
GUIDE
to display
the disc menu.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
“Learn” the 1.
GUIDE
key on the original remote in
the Guide learning position.
Learn the 2.
PAGE
and
PAGE
keys of the
original remote in the Page Up and Page Dn
learning positions.
While watching the device, press 1.
GUIDE
to
display the guide.
Press 2.
CH/PAGE
/ to send the Page Up/Dn
commands for the guide.
Page Up
Page Dn
Using Page Up/Down
If the device’s original remote control has separate
keys for Channel Up/Dn and Page Up/Dn, the TV
remote control’s
CH/PAGE
/ key can work like
the two separate keys.
“Learn” 1.
CHANNEL
/ in the Channel Up/Dn
positions.
“Learn” 2.
PAGE
/ in the Page Up/Dn posi-
tions.
Inside the Guide•
Press
CH/PAGE
/ to send the Page Up/Dn
commands.
Outside the Guide•
Press
CH/PAGE
/ to send the Channel Up/
Dn signal.
Enter Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
SELECT
or
OK
. A second key is for use with number keys for direct channel selection. NetCommand
uses the same
ENTER
key for both operations.
When
ENTER
has a menu or guide function or when
the original remote control uses the same key for
menus and channel selection:
Learn the
ENTER
,
SELECT,
or
OK
key in the
NetCommand Enter learning position.
Press 1.
MENU
or
GUIDE
to display the device’s
menu or guide.
Press 2.
ENTER
within the menu and
NetCommand will send the Enter signal for
menus.
Enter (digits)
When
ENTER
is for channel changes, i.e., the original
remote control has a separate
ENTER
key for this
function):
Learn the
ENTER
key for channel selection in the
NetCommand Enter (digits) learning position.
Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Press digit key(s) and then press
ENTER
.
NetCommand will send the Enter signal for
channel selection.
Cancel CANCEL as the Cancel or Exit Function
“Learn” the Cancel or Exit function in the
NetCommand Cancel learning position
Press 1.
MENU
or
GUIDE
to display the menu or
guide.
Press 2.
CANCEL
and NetCommand will send
the Cancel or Exit signal.
(separator)
The symbol “—” can serve as the separator
between a digital channel’s main and sub-
channel digits, e.g., digital channel 12-1 (main
channel is 12, sub-channel is 1).
“Learn” the channel separator function in the
NetCommand – (separator) learning position.
Press digit key(s) and press
CANCEL
.
NetCommand will send the channel-separator
signal.
Operating NetCommand-Controlled Devices, continued