Filter
Top Products
38 5. TV Menu Settings
AV Menu
An on-screen slider displays when making some audio
and video adjustments. Numeric values represented
on the slider range from 0 (minimum) to 63 (maximum),
with 31 as the mid-point.
AV menu for audio and video adjustments
AV Menu Options
Video See the description of video adjustments later in this section.
Audio See the description of audio adjustments later in this section.
Reset
• To reset audio and video adjustments for the current input, highlight the Reset icon and
press
ENTER
.
• Reset has no effect on settings for Balance, Listen To, Language, and Film Mode.
PerfectColor
PerfectColor Sliders
Adjust the saturation (intensity) of six colors for the current image source.
PerfectTint Sliders
Adjust six hues for the current image source
Highlight the PerfectColor™ icon and press
ENTER
to display the PerfectColor menu. Settings
are retained in memory independently for each TV input.
•
To switch between PerfectColor™ and PerfecTint™, highlight
Adjust Mode
and press .
• Press to move from one color bar to the next.
• Press to change settings.
• Press
CANCEL
to restore default settings.
• Press
MENU
to return to the Main menu.
Global
Video Noise
High,
Medium,
Low, Off
Reduce minor noise (graininess) in the picture. Use Low with
good-quality signals. Use High with poor-quality signals.
Use Off to leave the picture unaltered. Saved by input
Video Mute On, Off On
displays a blue background when there is no signal on the
current
INPUT
,
COMPONENT,
or
HDMI
jack
.
Film Mode
(for 480i and 1080i
signals only)
Auto, Off
In
Auto
, the TV automatically detects and applies film-
decoding correction. Try the
Off
setting if images show
many jagged edges. Saved by input.
SharpEdge On, Off Use SharpEdge™ to add special edge enhancements to
make the image appear sharper. Saved by input
Smooth 120hz Demo
Off, On
Use On to see a demonstration of Smooth120Hz™ processing.
Blue Glow On if TV
off, On if
TV on, Off
Select Off to keep the decorative blue light turned off at
all times; select one of the On options if you wish to see
the blue light.