Mitsubishi Electronics PD-5050 Flat Panel Television User Manual


 
20
ColorView™
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Using COLORVIEW
Press MENU/ENTER button to access MAIN MENU.
Use the
▲ ▼ buttons to select the PICTURE menu and
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select COLORVIEW and then press
the MENU/ENTER button.
Use the ▲ ▼
buttons to select the color you want to adjust.
Use the
buttons to adjust the color.
SEL.
ADJ.
EXIT
RETURN
COLOR VIEW
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
RESET
: OFF
Y
C
M
G
R
B
M
Y
C
R
B
G
Information
COLORVIEW settings
RED: Adjust red
GREEN: Adjust green
BLUE: Adjust blue
YELLOW: Adjust yellow
MAGENTA: Adjust magenta
CYAN: Adjust cyan
RESET: Resets settings to the factory default value.
Use
and
buttons to select “ON”, then press the
MENU/ENTER button.
Adjusting the pedestal level (black level)
This feature adjusts the video black level in a video image.
Example: Setting “3.75%”
Press MENU/ENTER button to access MAIN MENU.
Use the
▲ ▼ buttons to select the PICTURE menu and
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select the SET UP LEVEL setting.
Use the
buttons to change the SET UP LEVEL.
SEL.
ADJ.
EXIT
RETURN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLORVIEW
FILM MODE
PICTURE MODE
: OFF
: OFF
: MEDIUM
: 2
: AUTO
: 3.75%
: ON
: NORMAL
G
R
Information
SET UP LEVEL settings
0%: Normal status
3.75%: 3.75% lower than normal
7.5%: 7.5% lower than normal
FILM Mode
Press MENU/ENTER button to access MAIN MENU.
Use the
▲ ▼ buttons to select the PICTURE menu and
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select the FILM MODE setting.
Use the
buttons to turn FILM MODE on or off.
SEL.
ADJ.
EXIT
RETURN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLORVIEW
FILM MODE
PICTURE MODE
: OFF
: OFF
: MEDIUM
: 2
: AUTO
: 0%
: OFF
: NORMAL
G
R
Information
FILM MODE
ON: Automatic discrimination of the image and
projection in FILM mode.
OFF: FILM mode does not function.
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Press MENU/ENTER button to access MAIN MENU.
Use the
▲ ▼ buttons to select the PICTURE menu and
then press the MENU/ENTER button.
Use the ▲ ▼ buttons to select the PICTURE MODE setting.
Use the
buttons to change the PICTURE MODE.
SEL.
ADJ.
EXIT
RETURN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLORVIEW
FILM MODE
PICTURE MODE
: OFF
: OFF
: MEDIUM
: 2
: AUTO
: 0%
: ON
: NORMAL
G
R
PICTURE MODE
: THEATER1
Information
Types of picture modes
THEATER1, 2: Set this mode when watching video in a
dark room.
This mode provides darker, finer pictures, like the screen
in movie theaters.
For a darker image, select THEATER2.
NORMAL: Set this mode when watching video in a bright
room.
This mode provides dynamic pictures with distinct
differences between light and dark sections.
BRIGHT: This mode provides brighter pictures than
NORMAL.
DEFAULT: Use this to reset the picture to the factory
default settings.