Filter
Top Products
44
45
Antenna
(Figure 32)
Select Ant-A or Ant-B. For each antenna, you can
add or delete channels in memory, name channels,
and add channels to the SQV (Super Quick View™)
list.
Channel
(Figure 33)
Select to edit the channel selections. You can add or
delete from memory, name, or add to the SQV (Super
Quick View™) list.
After selecting Channel, editing can be done using the
Adjust buttons or entering the digit channel number
you want to change (Example for channel ).
For WS-, WS- and WS-, during
NetCommand® IR setup, if you connected a cable box
with an RF output other than channel you can use
the Channel Edit menu to tune the TV to the correct
channel.
Change Antenna from Air to Cable. Then for the
Channel, select or , depending on your cable
box requirement. The channel you select in this menu
will be the fixed channel used with your cable box.
CHANNEL EDIT Menu: Antenna, Channel Selection
ENTER for menu or to start
MENU to return
ENTER for menu or to start
MENU to return
Figure 32. Antenna
Figure 33. Channel