Filter
Top Products
56
57
Main Menu Choices
Setup
Figure 1
Use the Setup menu to select English or Spanish as
the language for the menus and on-screen displays.
Adjust Color Balance Automatically or manually
(PerfectColor™) using six colors, Magenta, Red, Yellow,
Green, Cyan and Blue. Reset the Color Balance to the
factory default settings. Align the focus (convergence)
of the TV’s projected light beams or reset the focus to
the factory default settings.
Figure 1. Main menu, Setup selected
Figure 4. Main menu, Time selected
Captions
Figure 5
Within broadcaster set parameters, display and
customize closed captions, including background
and appearance. Analog and digital captions are set
separately.
Figure 5. Main menu, Captions selected
V-Chip Lock
Figure 6
Block or allow programing based upon rating signals
sent by the broadcast station, lock by time, or lock the
front panel buttons.
Figure 6. Main menu, V-Chip Lock selected
Figure 2. Main menu, NetCommand selected
NetCommand
Figure 2
Add, change, review or delete NetCommand® settings
and devices. Start or restart the initial NetCommand
setup. If more than one digital recording device is
connected, use this menu to change the default digital
Record To device. Turn the transport menu off and
change the order of the icons in the Device Selection
menu.
Antenna
Figure 3
Memorize available analog and digital channels for
Ant-1 and Ant-2. After memorization, if a channel
displays as digital and analog, you can choose to see
the channel digitally every time it is selected. You
can manually add or delete channels from memory,
name channels or add your favorite channels to a SQV
(SuperQuickView™) list.
Figure 3. Main menu, Antenna selected
Audio/Video
Figure 7
Reset the A/V Memory to return to the original factory
A/V settings for a selected device. Customize the
individual audio and video settings. Display a blue
screen when viewing a device with no signal, enhance
the darker parts of bright pictures or turn the TV
speakers On or Off.
Figure 7. Main menu, Audio/Video selected
Time
Figure 4
Set the TV’s clock manually or automaticallly for
your time zone, including Daylight Savings Time, if
applicable. If Auto is selected, the TV will set the time
based upon Extended Data Service (XDS) time data.
This time data is usually broadcast by your local PBS
station. This menu is also used to set the TV timer.