Filter
Top Products
29
Remote Control Functions: Overview
Figure 1, following page
1. Slide Switch: Selects A/V product to be controlled
by the remote control.
2. Numbers: Individually selects channels or enters
information into menus.
3. POWER: Turns power on and off for TV and other
A/V products.
4. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
5. QV (QuickView™): Switches between the current
channel and last channel viewed.
6. DEVICE: Displays the Device Selection menu
to select the device to view (ANT-1 and ANT-2
devices connected to the TV’s inputs or IEEE 1394
devices).
7. CHANNEL: Scrolls up or down through memorized
channels.
8. VOLUME: Changes sound level. Volume on-
screen displays are separate for analog devices
and digital devices.
9. GUIDE: Displays program guide for satellite
receivers, some cable boxes or DVD Disc menus.
Displays ChannelView for ANT-1 and 2. Displays
Track List for A/V Disc.
10. SLEEP: Sets the TV to turn off within 2 hours. See
Sleep Timer, next page, for setup instructions.
11. VIDEO: Selects the video settings.
12. AUDIO: Selects the audio settings.
13. MUTE: Turns sound on or off.
14. Light: Located on the left side of the remote
control. This feature illuminates buttons or labels.
15. ENTER/EXCH: Selects a channel number or
menu item. Exchange PIP or POP and main TV
picture. If PIP or POP is displayed, it must be
cancelled before using the on-screen menus for
devices.
16. ADJUST: Press , , and to navigate
menus, change settings, and move the PIP on-
screen location. Operates many NetCommand®
functions.
17. CANCEL/SUB: Clears SQV and some menu
entries and cancels recordings. For digital
channels, adds a separator (or dash) between
major and sub channels.
18. TV MENU: Displays
on-screen menu
system.
19. DEVICE MENU: Displays
menus for devices
connected to TV.
20. V-CHIP: Turns On or Off the V-Chip Lock.
21. FORMAT: Changes the shape and size of the main
TV picture.
22. PIP/POP: Cycles through PIP and POP display
choices.
23. PIP DEVICE: Displays PIP Selection menu to
select the PIP or POP image source device.
24. PIP CH: Scrolls up or down through memorized
channels for PIP or POP.
25. HOME: Exits TV on-screen menus and return to
TV viewing.
26. INFO: Displays on-screen summary of the current
device used and any broadcast information
available (including current V-Chip information).
See Appendix D for details.
27. REC/CONNECT: Record with a VCR, setup
recordings for DVCR or IEEE 1394 devices. Initiate
IEEE 1394 peer-to-peer connections. Setup
recordings while in ChannelView.
28. STOP: Stops a VCR, DVD or A/V Disc.
29. PAUSE: When no PIP or POP image is displayed,
pauses the main TV Picture. When PIP or POP
image is visible, pauses that image. Pauses a VCR,
DVD or A/V Disc.
30. REW/REV: Rewind or reverse search with a VCR,
reverse scan with a DVD or A/V Disc.
31. PLAY: Play a VCR, DVD or A/V Disc.
32. FF/FWD: Fast forward or forward search with a
VCR or fast play a DVD.