Filter
Top Products
Appendices 33
Appendix B: Troubleshooting, continued
Sound
Symptom Remarks
1. There is no sound even when the • Check if the MUTEkey is on.
volume is turned up. • The TV's analog Listen to setting may be set to SAP (analog
program from the ANT input) but no SAP is being broadcast.
Check that the Sound > Audio > TV Speakers option is set to On
to hear sound from the TV speakers. Possibly the TV Speakers
option is Off.
If using an A/V receiver, check that the Sound > Audio > TV
Speakers option is set to Off to hear sound from the A/V receiver
speakers.
The language selected in the Setup > Antenna DigitalAudio
menu is not being broadcast for the current program.
Press and hold the POWERbutton on the control panel for 10
r r r
2. The sound does not match the screen The TV's analog Listen to setting may be set to SAP (analog program
......................................................................................................................................................................................................................................................................................................................!romtheANT!nput):...............................................................................................................................................................................................................................................................................................................................................................................................................
3. The sound from my A/V receiver does _ Check that DIGITAL AUDIO OUTPUT on the TV's connection
not match the screen picture (I should panel is connected to the A/V receiver.
hear the correct audio from my A/V Without this connection, devices connected only to the TV (and
receiver), not the A/V receiver) can be heard only from the TV speakers.
Note that this includes the ANT input, a device (such as a
camcorder) connected to the TV, and any other device sending
audio to the TV only.
Make sure the A/V receiver is set to the correct input.
does not appear inthe input Selection Input Sensing. Assign the name CD/Audio or MP3 to make the
• ' • ' '
5.. ;;;Sound =scoming from the TV speakers Connect the TV s aud,o output to the A/V receiver.
instead of the A/V receiver. * Change TV Speakers setting to Off.
For assistance call 1(800) 332-2119