Filter
Top Products
22 Chapter 2. TV Connections
Standard Cable Box, Satellite
Receiver, or Other Device with
S-Video
Required: S-Video cable and left/right analog stereo
audio cables.
1. Connect the cable from the outside cable or satellite
service to
CABLE IN
or
SATELLITE IN
on the
cable box or satellite receiver.
2. Connect an S-Video cable from
VIDEO OUT
on the
cable box or satellite receiver back panel to
INPUT
S-VIDEO
on the TV back panel.
3. Connect left (white) and right (red) audio cables from
AUDIO OUT
on the cable box or satellite receiver to
INPUT/AUDIO LEFT
and
AUDIO RIGHT
on the
TV back panel.
Note: Refer to the cable box or satellite receiver Owner’s
Guide for cable or dish antenna connections to the
receiver.
TM
R
Figure 2. Connecting a device with S-Video
Wall Outlet Cable (no cable box)
(can be used with a CableCARD™)
It is very important to connect the incoming cable for your
primary viewing source to
ANT 1/MAIN
, especially for
CableCARD™ use.
1. Connect the primary incoming coaxial lead cable to
ANT 1/MAIN
on the TV back panel.
2. For an optional secondary antenna source, connect
an antenna (or cable) to
ANT 2/AUX
.
3. If you have subscribed to a CableCARD™ service,
Insert the CableCARD into the CableCARD slot. The
top of the card must face in the direction indicated by
the
CARD TOP
arrow.
See chapter 1, “Television Overview,” for additional
CableCARD information. Detailed TV Guide On Screen
information is in the separate User’s Manual.
TM
R
Figure 3. Wall Outlet Cable