Mitsubishi Electronics WS-B55 Projection Television User Manual


 
46
47
Antenna Menu
(Figure 1)
Select Ant-A, Ant-B, or Ant-DTV for use with the
rest of the option on the Antenna Menu. You can
memorize channels, add or delete channels, and
add channels to an SQV (Super Quick View™) list.
For Ant-A and Ant-B, you can name channels.
On Ant-DTV, when the broadcaster has sent a
virtual channel number, the virtual channel number
is shown in the text box and the original digital
channel is shown below as a reference.
Memory
(Figure 1)
After the available channels have been memorized
with Memorize, weaker channels viewed with Ant-A
or Ant-B can be added. Unwanted channels for
Ant-A, Ant-B, or Ant-DTV can also be deleted. Use
the CH or button on the remote control to see
the channels in memory. Use Adjust or to
select Added or Deleted for the channel shown in
the “Channel” option box.
Name
(Figure 1)
Channels shown on Ant-A or Ant-B can be named
(up to four characters). After you enter a name, it
will appear on the TV screen, next to the channel
number.
1. Use Adjust or to select each letter
2. Press ENTer to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Antenna Menu: Antenna, Memorize Channels, Channel,
Memory and Name
Figure 1. Antenna menu
Memorize
(Figure 1)
For ANT-A or ANT-B
Select either Air (when used with an indoor/outdoor
antenna) or Cable (when used with direct cable)
then press ENTer to start the automatic channel
memorization process.
For ANT-DTV
Select Air when used with an indoor/outdoor
antenna. Select Cable when used with Direct cable.
There are three types of Cable systems: Standard,
IRC and HRC. To memorize Standard or IRC, select
Cable; to memorize HRC, select Cable (HRC).
Check with your Cable company to determine
which type of Cable system they use. If your cable
company cannot help you, select Cable.
To stop the automatic channel memorization
process, press CANCEL. Channels memorized
before you pressed CANCEL are retained in
memory.
After memorizing channels, the channels in
the memory can be accessed in ascending or
descending order or by pressing the CH or
buttons.
Channel
(Figure 1)
Select the channel you want to add or delete
from memory, name, or add to an SQV
(SuperQuickView™) list.
Use ADJUST or to select the channel for
editing or use the CH or buttons for only
those channels already in memory.