Mitsubishi Electronics WS-B55 Projection Television User Manual


 
80
81
Appendix F: Cabinet Separation
Cabinet Separation for Model WS-65611, WS-65711 and
WS-73711
For Mitsubishi Dealers and
Service Personnel Only
The Mitsubishi TV models WS-65611, WS-65711
and WS-73711 cabinets are assembled in two
pieces. These pieces may be separated to allow
for easier delivery and set up. The instructions
below show how to safely separate and reattach the
cabinet. This TV weighs over 320 lbs and has many
sensative components. This dismantling procedure
should be done by authorized Mitsubishi Dealers or
Service Personnel only.
The following steps should be performed by two people:
1. Remove the decorative Plastic Covers (2) on
each side of the cabinet and then remove the
exposed Screws (2) on each side.
2. Carefully lift the Cabinet-Top straight up until
the Brackets are clear from the Cabinet-Bottom.
3. Carefully place the Cabinet-Top on the oor.
4. Once you have moved and positioned the
Cabinet-Bottom to its desired location, reverse
the procedure and mount the Cabinet-Top on the
Cabinet-Bottom. Be sure you align the Brackets
properly. Keep ngers clear of all joints! Replace
the screws and the decorative Plastic Covers.
1
2
3
4
Appendix F: Cabinet Separation