Filter
Top Products
I - 4
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing
covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified
service personnel.
• Do not damage the power cord (ex, placing any heavy objects on the power cord). The damage to
the cord may cause shock or fire.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which
can be harmful or fatal or may cause electric shock, fire or equipment failure.
• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,
causing serious damage to the monitor, or The unit could fall or tip over and may result in injury.
• Do not spill any liquids into the cabinet or use your monitor near water, or it may result in a fire or
electric shock.
• Plug power cable completely into wall outlet and inlet lf the main unit, incomplete plugging may cause
fire or electric shock.
• Immediately unplug your monitor from the wall outlet, holding the male plug. And refer servicing to
qualified service personnel under the following conditions, or it may result in a fire or electric shock.
• When the power supply cord or plug is damaged.
• If liquid has been spilled or objects have fallen into the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet is damaged.
CAUTION
Recommended Use
For optimum performance, please note the following when setting up and using the MultiSync
LCD1500M colour monitor:
• The optimum monitor position is facing away from direct sunlight.
• Use the monitor in a clean and dry area.
• Handle with care when transporting. Save packaging for transporting.
• The power cable connector is the primary means of detaching the system from the power supply.
The monitor should be installed close to a power outlet which is easily accessible.
• The inside of the fluorescent tube located within the LCD monitor contains mercury. Please follow the
bylaws or rules of your local municipality to dispose of this tube property.
• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution,
glass cleaner or tissue paper.
• For optimum performance, allow 30 minutes for warm-up.
• Avoid displaying fixed patterns on the monitor for long periods of the time to avoid image persistence
(after-image effects.)
• Avoid applying pressure to the LCD monitor surface.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE,
SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE
MONITOR:
• Adjust the monitor height so that top of the screen is at or slightly below eye level.
Your eyes should look slightly downward when viewing the middle of the screen.
• Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The
optimal distance is 53 cm for the MultiSync LCD1500M monitor.
• Rest your eyes periodically by focusing on an object at least 6 m away.
• Position the monitor at a 90° angle to windows and other light sources to minimize glare and
reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.
• If reflected light makes it hard for you to see your screen, use an anti-glare filter.
• Adjust the monitor’s brightness and contrast control to enhance readability.
• Use a document holder placed close to the screen.
• Position whatever you are looking at most of the time (the screen or reference material) directly in
front of you to minimize turning your head while you are typing.
• Get regular eye checkups.
WARNING
• Allow adequate ventilation around the monitor so that heat can properly dissipate.
Do not block ventilated openings or place the monitor near a radiator or other heat sources, Do not
spill anything on top of monitor, or it may result in a fire or electric shock.
• Do not store or use the unit in places exposed to direct sunlight or near equipment that generates
heat. It may result in fire.