NEC LA-1524HMW Flat Panel Television User Manual


 
Note:
• If a filter or touch panel is attached to the screen, blocking the speakers, the sound quality
and volume will be affected.
• Volume will vary depending on the headphones and microphone being used, so set the
volume as appropriate.
• Interference may occur if the micro-cable and speaker cable are positioned close to the
display monitor. If noise occurs in the speakers or headphones, move the cables away from
the monitor.
Connect the speaker cable to the
AUDIO OUT terminal of the computer.
Connect the speaker cable to the
SPEAKER terminal of the computer.
Using Headphones
Prepare the headphones (commercially available) and connect as shown in the illustration
below.
Connect the cable from the
headphones.
Using the Multi-media Functions
Your personal computer must have a voice input / output function.
Always use the accessory cable provided.
Using the Speakers
Prepare the speaker cable (accessory) and connect as shown in the illustration below.
Connect the cable to the AUDIO IN
terminal on the back panel of the main
unit.
* The shape of the terminal of your computer may differ from that shown here. In such
case, read the instruction manual for your computer and connect as indicated.
* Lower the volume if howling occurs.
To an IBM PC or Compatible
To a Macintosh
I - 8