Filter
Top Products
User’s Manual
18
Click the “Alarm Config” button to configure the
alarm settings in detail.
MD Alarm: Set action when motion is triggered.
I/O Alarm: Set action when external alarm is triggered.
HDD Loss: Set action when HDD is operating irregularly.
HDD Space: Set this to trigger the alarm(s) when the
“HDD Overwrite” option is disabled and the HDD is full.
Video Loss: Set this to trigger the alarm when any of the
camera signal is distorted or loss.
ALARM Time: Configure these options for how long the
external and built in buzzer will react when alarm is
triggered.
Pre Record: Your DVR temporarily store 5 seconds of
video before any alarm is triggered. Set this to “ON” if you
would like the pre-recorded 5 seconds to be saved to your
HDD also.
6.2.2 Playback
To play a recorded video, select “Main Menu”
“Playback” Functions to open the RECORD SEARCH
menu.
To search for a file, enter specific date and click
“SEARCH”, you will find all the recordings of that day. You
can play video Forward at 2x, 4x, and 8x speeds, Slow
play at 1/2x, 1/4x, 1/8x, or normal play, pause and play
frame by frame using the playback control bar, and adjust
volume by clicking or sliding tune control bar. When
playback is finished, system will return to previous menu.
You can select a file and push the Select button to playback the file, or use the FWD button
and down button to select options or backup the recorded file you selected. You can also put
a check mark in the box at the end of multiple files if you want to backup more then one file at
a time.