Filter
Top Products
User’s Manual
7
2. Locate the SATA Power and Data cables in your DVR.
3. Connect the SATA Power and Data cables to the back of your Hard Disk Drive.
4. Mount the Hard Disk to your DVR using the included mounting screws.
5. Place the DVR cover back onto the DVR.
6. Use the 8 case screws removed from step 1 to mount the DVR Case to the DVR.
WARNING: The DVR case must be secured to the DVR using all 8 mounting screws. Operating
the DVR without the cover is extremely dangerous. It may cause severe injury and will void the
warranty.
7. Once your Hard Disk(s) is installed successfully, please go to section 6.2.13.4 (HDD
Management) of this manual to format the Hard Disk. The Hard Disk must be formatted before it
can be used.