Olympus DS-10 DVR User Manual


 
10
Recording
The recorder provides five folders, A, B, C,
D and E, and each message recorded in a
folder is saved as a Digital Speech Standard
(DSS) file or a Windows Media Audio (WMA)
file. These five folders can be selectively used
to distinguish the kind of recording; for example,
A might be used to store private information,
while B might be dedicated to holding business
information ( P.19). Up to 199 messages can
be recorded per folder.
1
Press the FOLDER/REPEAT button
to choose a folder.
The folder name is displayed.
2
Press the REC button to start
recording.
The record/play indicator lamp glows red.
Aim the microphone at the sound source.
3
Press the STOP button to stop
recording.
Notes
A beep will sound when remaining recording time reaches
60 seconds, 30 seconds, and 10 seconds while recording.
•“MEMORY FULL or FOLDER FULL will be displayed
when the memory or file capacity is full. Delete any
unnecessary files before recording any further ( P.15)
or transfer voice files to your computer using DSS Player
Software ( P.26).
Recording functions
Pause Recording
Pause
Press the REC button while recording.
REC PAUSE will flash on the display.
Resume Recording
Press the REC button again.
Recording will resume at the point of
interruption.
Note
The recorder stops when it has been left paused for 10
minutes or longer.
Immediately check recording content
Press the PLAY/SET button while recording.
Recording will stop and the recorded file
will be played back.
Listening While Audio Is Recorded
(Recording Monitor)
Insert the earphone into the earphone jack
to monitor what is being recorded. (Volume
can be controlled using the Volume control.)
Recording