Filter
Top Products
22
Moving Files Across
Folders
A recorded file can be transferred from one
folder to another.
The file is added at the end of existing files in
the destination folder.
1
Choose the file you want to move
and play it.
2
Press and hold the FOLDER/
REPEAT button for 1 second or
longer while the file is playing.
“MOVE?” appears on the display.
3
Press the FF/+ or REW/– button
to choose a destination folder.
If you choose the current folder as the
destination folder, the selected file will move
to the end of the existing files in it.
4
Press the PLAY/SET button to
accept the chosen destination
folder.
The file is moved.
“MOVE DONE” displays when transfer is
completed.
Notes
• If the destination folder is full (a maximum of 199 files),
“FOLDER FULL” appears on the display and files cannot
be transferred to it.
• The file transfer process is aborted if you press the STOP
button or leave the recorder idle for 8 seconds after you
choose a destination folder.
System Sounds
(BEEP)
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
1
Press the MENU button.
The menu opens (☞ P.25).
2
Press the FF/+ or REW/– button
until “BEEP” flashes on the
display.
3
Press the PLAY/SET button.
The system sound setup process begins.
4
Press the FF/+ or REW/– button
to choose between ON and OFF.
ON :System sounds are enabled.
OFF: System sounds are disabled.
5
Press the PLAY/SET button to
complete the setup screen.
6
Press the STOP button to close the
menu.
Note
If the alarm playback function has been set, the alarm will
sound at the scheduled time even if system sounds are
turned off.
Moving Files Across Folders / System Sounds (BEEP)