Filter
Top Products
14
Continuous Playback
(ALL PLAY)
When a file finishes playing back, the next
file is played without stopping until it reaches
the last file in the folder.
1
Press the MENU button.
The menu opens (☞ P.25).
2
Press the FF/+ or REW/– button
until “ALL PLAY” flashes on the
display.
3
Press the PLAY/SET button.
The Continuous Playback setup process
begins.
4
Press the FF/+ or REW/– button
to choose between ON and OFF.
ON : Continuous playback.
OFF:Returns to normal playback mode.
5
Press the PLAY/SET button to
complete the setup screen.
6
Press the STOP button to close the
menu.
Repeat Playback
Notes
• If a file is played back to the end without designating an end
position, the end of the file becomes the end position and
Repeat Playback begins.
•
Press the FF/+ button either once briefly or continuously to go
to the end of the file being played back.
• To use this function, briefly press the FOLDER/REPEAT
button. If you hold it 1 second or longer, the Moving Files
screen appears.
Continuous Playback (ALL PLAY) / Repeat Playback
This function enables repeated playback of
part of the file being played.
1
Choose the file for Repeat Playback,
and press the PLAY/SET button.
File playback begins.
2
Press the FOLDER/REPEAT button
briefly at the point you want to start
Repeat Playback.
“REPEAT END?” flashes until you
designate the end point.
3
Press the FOLDER/REPEAT button
briefly again at the position you
want Repeat Playback to end.
The recorder repeatedly plays back the
section between the start and the end
positions until you cancel Repeat Playback.
4
Press the STOP button or FF/+
(REW/–) button to stop.
Repeat Playback is cancelled.
You can use Fast Playback and Slow
Playback functions, insert and delete index
marks, and use the Noise Cancel function.