Olympus DS-3300 DVR User Manual


 
30
2
Hands-free Recording
Hands-free Recording/ Recording Monitor
The recorder can be used as a hands-free recording device. To setup the recorder for hands-
free operation, connect the optional Olympus foot switch (RS25/26) to the back of the cradle
and place the recorder in the cradle as shown in the diagram below.
The default settings of the foot switch functions
are as follow:
It is possible to monitor your recording by listening to the
recording while recording is in progress. Insert the
earphone plug into the earphone jack and use the
VOLUME button to control the volume level.
Recording Monitor
Default settings
VOLUME
(+) / ()
button
Switch
FF
LISTEN
REW
Press
NEW
Press and hold
REC
REV
Release
STOP
PLAY
..............................................................................................................................................................
Note
Insert the plugs to the end as shown in the illustration when inserting the earphone or external microphone.
..............................................................................................................................................................
Notes
The Olympus foot switch (RS25/26) is sold separately.
Make sure the recorder is STOP mode before connecting it to the cradle for hands-free recording.
To record with better quality using the hands-free recording function, set the microphone sensitivity to
"CONF." mode, or use an external microphone.